factory Outlets for Wood Look Virgin Material Spc Flooring - SPC Floor SM-026 – Aolong Detail:
How to choose a home floor
Formaldehyde content standard: the standard value of formaldehyde content of Grade A is within 8mg / 100g. B pole 9 to 40 mg / 100 g, so that B level can be used. The quality of glue determines the size of environmental pollution of reinforced composite floor. The glue with high cost performance has low formaldehyde concentration.
Moisture content: the moisture content of qualified products is in the range of 3.0-10.0%. when you buy Flooring, you can check this kind of data information according to the product quality inspection certificate, and check whether the assembly line is vertical or not. The level of detail of the assembly line is immediately related to the service life of the floor.
There should be no fresh flowers, dry flowers, opaque milky white, wet flowers, mist, stains, scratches and impressions on the surface of the pre impregnated adhesive paper decorative panel. The tongue and mortise around should be kept in detail. The length, width and thickness of the sandwich board should be the same as that of the product introduction. You can take a few composite floors at will for inspection after splicing to see whether the mortise tenon joint is uneven. The joints should be tight. Then you can take a few floors at will for independent assembly to see whether the mortise tenon joint is tight and whether the touch is even.
Specification | |
Surface Texture | Wood Texture |
Overall Thickness | 4mm |
Underlay(Optional) | EVA/IXPE(1.5mm/2mm) |
Wear Layer | 0.2mm. (8 Mil.) |
Size specification | 1210 * 183 * 4mm |
Technical data of spc flooring | |
Dimentional stability/ EN ISO 23992 | Passed |
Abrasion resistance/ EN 660-2 | Passed |
Slip resistance/ DIN 51130 | Passed |
Heat resistance/ EN 425 | Passed |
Static load/ EN ISO 24343 | Passed |
Wheel caster resistance/ Pass EN 425 | Passed |
Chemical resistance/ EN ISO 26987 | Passed |
Smoke density/ EN ISO 9293/ EN ISO 11925 | Passed |
Product detail pictures:
Related Product Guide:
Our firm since its inception, normally regards item high quality as company life, constantly make improvements to generation technology, improve product excellent and repeatedly strengthen organization total good quality management, in strict accordance with the national standard ISO 9001:2000 for factory Outlets for Wood Look Virgin Material Spc Flooring - SPC Floor SM-026 – Aolong, The product will supply to all over the world, such as: Bahamas, Curacao, Switzerland, Our items have national accreditation requirements for qualified, high quality products, affordable value, was welcomed by people today all over the world. Our goods will continue to enhance within the order and look forward to cooperation with you, Should any of these products be of interest to you, please letus know. We are going to be content to offer you a quotation up on receipt of your detailed needs.
By Kay from El Salvador - 2018.12.14 15:26
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Emma from Finland - 2017.02.14 13:19