China Wholesale Wall And Floor Tiles Pricelist – WPC Floor 1806 – Aolong Detail:
Installation of WPC floor
1. Sweeping the floor: clean up the garbage on the floor, including not a corner. If the floor is not cleaned, there will be a feeling of “rustling” under the floor.
2. Leveling: the horizontal error of the floor shall not exceed 2mm , If it exceeds, we should find a way to level it. If the floor is uneven, the feeling of feet will be bad after the floor is paved.
3. Lay the bottom layer (optional): after the floor is cleaned, lay the silent layer first, so as to prevent the noise in the process of using the floor.
5. Cross paving: the next step is to lay the floor. In laying, to a short side lay a long, so cross laying floor will bite, not easy to loose, after the floor assembly also use tools to knock tight.
6. Prying and fastening: after the installation in a certain area, it is better to fix the installed floor with a piece of waste board and pry the floor in with tools to completely bite the floor.
7. Choose layering: after the floor is paved, the next step is to install layering. Generally, if the floor is higher than the ground, you need to use that kind of high-low layering. If the floor is as flat as the ground, you need to use this kind of flat layering.
8. Install the pressure strip: when installing the pressure strip, be sure to bite the pressure strip and the floor, and tighten the screws, otherwise the pressure strip and the floor will be easily separated in the future.
| Specification | |
| Surface Texture | Wood Texture |
| Overall Thickness | 12mm |
| Underlay（Optional） | EVA/IXPE(1.5mm/2mm) |
| Wear Layer | 0.2mm. (8 Mil.) |
| Size specification | 1200 * 150 * 12mm |
| Technical data of spc flooring | |
| Dimentional stability/ EN ISO 23992 | Passed |
| Abrasion resistance/ EN 660-2 | Passed |
| Slip resistance/ DIN 51130 | Passed |
| Heat resistance/ EN 425 | Passed |
| Static load/ EN ISO 24343 | Passed |
| Wheel caster resistance/ Pass EN 425 | Passed |
| Chemical resistance/ EN ISO 26987 | Passed |
| Smoke density/ EN ISO 9293/ EN ISO 11925 | Passed |
Product detail pictures:
Related Product Guide:
We are experienced manufacturer. Wining the majority from the crucial certifications of its market for China Wholesale Wall And Floor Tiles Pricelist – WPC Floor 1806 – Aolong, The product will supply to all over the world, such as: Norwegian, Lisbon, Hamburg, We have gained a lot of recognition among customers spread all across the world. They trust us and always give repetitive orders. Furthermore, mentioned below are some of the major factors that have played significant role in our tremendous growth in this domain.
By Christina from Rwanda - 2017.09.28 18:29
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Frederica from Barcelona - 2018.06.18 17:25
