China Wholesale 4.0/5.0/6.0mm Spc Flooring Manufacture Price Factories – SPC Floor SM-027 – Aolong Detail:
How to choose a home floor
Formaldehyde content standard: the standard value of formaldehyde content of Grade A is within 8mg / 100g. B pole 9 to 40 mg / 100 g, so that B level can be used. The quality of glue determines the size of environmental pollution of reinforced composite floor. The glue with high cost performance has low formaldehyde concentration.
Moisture content: the moisture content of qualified products is in the range of 3.0-10.0%. when you buy Flooring, you can check this kind of data information according to the product quality inspection certificate, and check whether the assembly line is vertical or not. The level of detail of the assembly line is immediately related to the service life of the floor.
There should be no fresh flowers, dry flowers, opaque milky white, wet flowers, mist, stains, scratches and impressions on the surface of the pre impregnated adhesive paper decorative panel. The tongue and mortise around should be kept in detail. The length, width and thickness of the sandwich board should be the same as that of the product introduction. You can take a few composite floors at will for inspection after splicing to see whether the mortise tenon joint is uneven. The joints should be tight. Then you can take a few floors at will for independent assembly to see whether the mortise tenon joint is tight and whether the touch is even.
| Specification | |
| Surface Texture | Wood Texture |
| Overall Thickness | 4mm |
| Underlay（Optional） | EVA/IXPE(1.5mm/2mm) |
| Wear Layer | 0.2mm. (8 Mil.) |
| Size specification | 1210 * 183 * 4mm |
| Technical data of spc flooring | |
| Dimentional stability/ EN ISO 23992 | Passed |
| Abrasion resistance/ EN 660-2 | Passed |
| Slip resistance/ DIN 51130 | Passed |
| Heat resistance/ EN 425 | Passed |
| Static load/ EN ISO 24343 | Passed |
| Wheel caster resistance/ Pass EN 425 | Passed |
| Chemical resistance/ EN ISO 26987 | Passed |
| Smoke density/ EN ISO 9293/ EN ISO 11925 | Passed |
Product detail pictures:
Related Product Guide:
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for China Wholesale 4.0/5.0/6.0mm Spc Flooring Manufacture Price Factories – SPC Floor SM-027 – Aolong, The product will supply to all over the world, such as: Rwanda, Georgia, Houston, Create Values,Serving Customer! is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, You should contact with us now!
By Karen from Rio de Janeiro - 2018.09.23 17:37
The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
By Mark from Malaysia - 2018.07.27 12:26
